14
Adjust AGP/PCI Clock (Mhz)
This item allows you to select the AGP/PCI clock frequency (in MHz) by adjusting the AGP/PCI clock
to a higher frequency.
CPU Vcore Adjust
The setting allows you to adjust the CPU Vcore voltage. Available options: [Yes], [No].
CPU Vcore
The setting is adjustable if you set the CPU Vcore Adjust to [Yes] .
MSI Reminds You...
Changing CPU Ratio/Vcore could result in the instability of the system; therefore, it is NOT
recommended to change the default setting for long-term usage.
DDR Power Voltage
Adjusting the DDR voltage can increase the DDR speed. Any changes made to this setting may cause
a stability issue, so changing the DDR voltage for long-term purpose is NOT recommended.
AGP Power Voltage
AGP voltage is adjustable in the field, allowing you to increase the performance of your AGP display
card when overclocking, but the stability may be affected.
MSI Reminds You...
The settings shown in different color in CPU Vcore (V), DDR Power Voltage (V) and AGP Power
Voltage (V) helps to verify if your setting is proper for your system.
White: Safe setting.
Yellow: High performance setting.
Red: Not recommended setting and the system may be unstable..
To Next Page
Loading...
Need help?
General
