To Next Page

To Previous Page

3-15

BIOS Setup

driver to initialize the VGA card. Therefore, if the AGP driver of the card does

not support the initialization feature, the display may work abnormally or not

function after resuming from S3.

Power Management/APM

Setting to Enabled will activate an Advanced Power Management (APM)

device to enhance Max Saving mode and stop CPU internal clock. Settings:

Disabled, Enabled.

Suspend Time Out (Minute)

After the selected period of system inactivity, all devices except the CPU shut

off. Settings: Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60.

Power Button Function

This feature sets the function of the power button. Settings are:

On/Off The power button functions as normal power off button.

Suspend When you press the power button, the computer enters

the suspend/sleep mode, but if the button is pressed for

more than four seconds, the computer is turned off.

Restore on AC/Power Loss

This setting specifies whether your system will reboot after a power failure or

interrupt occurs. Available settings are:

Power Off Leaves the computer in the power off state.

Power On Leaves the computer in the power on state.

Last State Restores the system to the previous status before power

failure or interrupt occurred.

Set Monitor Events

Press <Enter> and the following sub-menu appears.

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE Neo2-P Platinum Edition and is the answer not in the manual?

MSI 865PE Neo2-P Platinum Edition Specifications

General