To Next Page

To Previous Page

3-16

MS-6728 ATX Mainboard

FDC/LPT/COM Ports, Primary/Secondary Master/Slave IDE

These items specify if the BIOS will monitor the activity of the specified

hardware peripherals or components. If set to Monitor, any activity

detected on the specified hardware peripherals or components will wake

up the system or prevent the system from entering the power saving

modes. Settings: Monitor, Ignore.

Set WakeUp Events

Press <Enter> and the following sub-menu appears.

USB Device Wakeup From S3

This item allows the activity of the USB devices (keyboard and mouse) to

wake up the system from S3 sleep state. Setting: Enabled, Disabled.

Resume On PME#

This field specifies whether the system will be awakened from power

saving modes when activity or input signal of the specified hardware

peripheral or component is detected. Settings: Enabled, Disabled.

Resume By RTC Alarm

This is used to enable or disable the feature of booting up the system on

a scheduled time/date from the soft off (S5) state. Settings: Enabled,

Disabled.

RTC Alarm Date/Hour/Minute/Second

If Resume By Alarm is set to Enabled, the system will automatically resume

(boot up) on a specific date/hour/minute/second specified in these fields.

Available settings for each item are:

Alarm Date 01 ~ 31, Every Day

Alarm Hour 00 ~ 23

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE Neo2-P Platinum Edition and is the answer not in the manual?

MSI 865PE Neo2-P Platinum Edition Specifications

General