3-21
BIOS Setup
Primary Graphics Adapter
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
Internal VGA The system initializes the onboard VGA device.
AGP/Int-VGA The system initializes the installed AGP card
first. If an AGP card is not available, it will
initialize the onboard VGA device.
AGP/PCI The system initializes the installed AGP card
first. If an AGP card is not available, it will
initialize the PCI VGA card. (This option
appears if the mainboard you purchsed is
without onboard VGA.)
PCI/AGP The system initializes the installed PCI VGA
card first. If a PCI VGA card is not available, it
will initialize the AGP card. (This option
appears if the mainboard you purchsed is
without onboard VGA.)
PCI/Int-VGA The system initializes the installed PCI VGA
card first. If a PCI VGA card is not available, it
will initialize the onboard VGA device.
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local
bus has bus mastering capability. Settings options: Disabled, Enabled.
PCI Slot1/Slot6 IRQ Priority, PCI Slot2/Slot5 IRQ Priority, PCI Slot3 IRQ
Priority, PCI Slot4 IRQ Priority
These items specify the IRQ line for each PCI slot. Setting options: 3, 4, 5, 7, 9,
10, 11, Auto. Selecting Auto allows BIOS to automatically determine the IRQ
line for each PCI slot.
Set IRQs to PCI or ISA
Press <Enter> to enter the sub-menu and the following screen appears:
MSI Reminds You...
Please note the setting options will be different depending on the
mainboard you purchased.
To Next Page
Loading...
Need help?
General
