MSI 945G Neo

Introduction to VIA VT6410 IDE RAID
6-9
Create and Delete Spare Hard Drive
If a RAID 1 array is created and there are drives that do not belong to other
arrays, the one that has a capacity which is equal to or greater than the array
capacity can be selected as a spare drive for the RAID 1 array. Select Create/
Delete Spare and press <Enter>, the channel column will then be activated. Select
the drive that you want to use as a spare drive and press <Enter>, the selected drive
will be marked as Spare. The spare drive cannot be accessed in an OS.
To delete a spare drive, highlight Create/Delete Spare and press <Enter>.
The spare drive will be highlighted, press <Enter> to delete the spare drive.