1-3
Getting Started
- Can connect up to Six Ultra ATA drives.
† SATAII controller integrated in ICH7/ICH7R.
- Up to 300MB/sec transfer speed.
- Can connect up to four SATAII devices.
- Serial ATA RAID 0, RAID 1, RAID 10, RAID 5 and Matrix RAID. (for ICH7R)
† VIA 6410, chipest. (optional)
- Supports Raid 0, Raid 1, Raid 0+1 and JBOD. (IDE2, IDE3)
On-Board Peripherals
† On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 1 serial port
- 1 VGA port
- 1 parallel port supports SPP/EPP/ECP mode
- 1 Line-In / Line-Out / MIC-In / Rear Speaker Out / Center-Subwoofer Speaker
Out/ SPDIF-Out / Side Speaker Out
- 8 USB ports (Rear * 4/ Front * 4)
- 1 RJ-45 LAN jack
LAN
† Intel 82573V
- Supports 10 / 100 / 1000 Mb/s.
- Compliane with PCI 2.2.
- Supports ACPI Power Management.
1394 (optional)
† Supports two IEEE1394 onboard pinheader. Transfer rate is up to 400 Mbps.
† Controlled by VIA VT6307 chip.
Audio
† High Definition link controller integrated in Intel
®
ICH7/ICH7R chip.
† 7.1 + 2 channels audio codec Realtek ALC882.
- Compliant with Azalia 1.0 Spec.
† Supports DTS effect.
BIOS
† The mainboard BIOS provides “Plug & Play” BIOS which detects the periph-
eral devices and expansion cards of the board automatically.
† The mainboard provides a Desktop Management Interface (DMI) function which
records your mainboard specifications.
Mounting and Dimension
† ATX Form Factor: 29.5 cm x 24.5 cm
† 9 mounting holes