EasyManuals Logo

MSI B450 TOMAHAWK User Manual

MSI B450 TOMAHAWK
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
32
BIOS Setup
fVR 12VIN OCP Expander [Auto]
Expands the limitation of VR Over Current Protection with 12V input voltage. The
higher expanding value indicates less protection. Therefore, please adjust the
current carefully if needed, or it may damage the CPU/ VR MOS. If set to "Auto",
BIOS will configure this setting automatically.
f CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
f DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto, BIOS
will set these voltages automatically or you can set it manually.
f Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the
memory has been replaced.
[Enabled] The system will issue a warning message during boot and then you have
to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
f CPU Specifications
Press Enter to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing [F4].
Read only.
fCPU Technology Support
Press Enter to enter the sub-menu. The sub-menu shows the key features of
installed CPU. Read only.
f MEMORY-Z
Press Enter to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
fDIMMx Memory SPD
Press Enter to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.
f CPU Features
Press Enter to enter the sub-menu.
fGlobal C-state Control [Enabled] (optional)
Enables/ disables IO based C-state generation and DF C-states.
fSimultaneous Multi-Threading [Enabled] (optional)
Enables/ disables the AMD Simultaneous Multi-Threading. This item appears when
the installed CPU supports this technology.
fOpcache Control [Auto] (optional)
Enables/ disables Opcache. Opcache stores recent decode instruction to save
the decoding time when the instruction is repeated. And it may increase the CPU
performance and reduce the power consumption slightly.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI B450 TOMAHAWK and is the answer not in the manual?

MSI B450 TOMAHAWK Specifications

General IconGeneral
ChipsetAMD B450
CPU SocketAM4
Memory Slots4 x DDR4
Maximum Memory64 GB
Form FactorATX
AudioRealtek ALC892 Codec
LANRealtek 8111H Gigabit LAN
RAID SupportRAID 0, 1, 10
PCIe Slots1 x PCIe 3.0 x16
Storage6 x SATA 6Gb/s, 1 x M.2
USB Ports6 x USB 2.0
Multi-GPU SupportAMD CrossFire
Memory Speed1866/2133/2400/2667(OC)/2933(OC)/3200(OC)/3466(OC) MHz

Related product manuals