36
Powering Up After Maintenance
1. Connect the external power supply to the PC.
2. Plug the power cord into the electrical outlet.
3. Power on the PC.
1
2
3
⚠
Important
∙
Use only the MSI provided AC adapter approved for use with this PC.
∙
If the power cord comes with a 3-pin plug, do not disable the protective earth pin
from the plug. The PC must be connected to an earthed mains socket-outlet.
∙
Plug the power cord into an electrical outlet that is easily accessible at all times.
∙
Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
∙
Always disconnect the power cord or switch the wall socket off if the PC would be
left unused for a certain time to achieve zero energy consumption.
To Next Page
Loading...
