ii
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a resi-
dential area is likely to cause harmful interference, in which case the user will
be required to correct the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party responsi-
ble for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order
to comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU
RESEAU.
MICRO-STAR
MS-8904
MICRO-STAR
MS-8907
MICRO-STAR
MS-8911
MICRO-STAR
MS-8912
MICRO-STAR
MS-8917
MICRO-STAR
MS-8919
MICRO-STAR
MS-8923
MICRO-STAR
MS-8930
MICRO-STAR
MS-8931
MICRO-STAR
MS-8938
MICRO-STAR
MS-8943
MICRO-STAR
MS-8948
MICRO-STAR
MS-8949
MICRO-STAR
MS-8958
MICRO-STAR
MS-8959
MICRO-STAR
MS-8936
MICRO-STAR
MS-8969
To Next Page
Loading...
Need help?
General
