12
Please install the memory module into the SO-DIMM slots as shown below.
Locate the SO-DIMM slot. Align the notch on the SO-DIMM with the key on the
slot and insert the SO-DIMM into the slot.
Push the SO-DIMM gently downwards until the slot levers click and lock the
SO-DIMM in place.
1
2
2
SO-DIMM
is properly inserted in the
SO-DIMM
slot.
To uninstall the
SO-DIMM
SO-DIMM
will be
released instantly.
Please install the M.2 device into the M.2_1 slot as shown below.
1
3
Standoff
Supplied
M.2 screw
30º30º
2
To Next Page
Loading...
