MSI H510TI-S09 - JPANELSW1: Panel Display Switch Connector; VCC_PWR_SEL: Panel Voltage Selection Header; BKLT_PWR_SEL: Backlight Inverter Voltage Selection Header

17
 
6
2
5
1
1 LCD_PWR 2 VCC3
3 VCC5 4 LCD_PWR
5 LCD_PWR 6 +12V
12V5V
3V
1
1 Ground
2 PANEL_SW

This connector is used to connect an on/ off switch for the panel display.

This header allows you to select 3V/5V/12V voltage for the panel.


This header allows you to select 12V/19V voltage for backlight module of the panel.
1
1 +12V
2 BKLT_VCC
3 19V
12V
19V