Hardware Setup
2-13
The mainboard provides connectors to connect to FDD, IDE HDD, case,
modem, LAN, USB Ports, IR module and CPU/Power supply/System FAN.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Connectors
Wake On Ring Connector: JMDM1
This connector allows you to connect to a modem card with Wake On Ring
function. The connector will power up the system when a signal is received
through the modem card.
JMDM1
NC
MDM_WAKEUP
5VSB
1
GND
NC
F
D
D
1
To Next Page
Loading...
Need help?
General
