Chapter 3
3-16
IDE Function Setup
Press <Enter> to enter the sub-menu and the following screen appears:
On-Chip Primary/Secondary PCI IDE
This setting enables or disables the internal primary and secondary PCI &
IDE controllers. Setting options: Disabled, Enabled.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (0-4) for each of the four IDE devices that the onboard IDE interface
supports. Modes 0 through 4 provide successively increased performance.
In Auto mode, the system automatically determines the best mode for
Integrated Peripherals
To Next Page
Loading...
