AWARD
®
BIOS Setup
3-19
ECP Mode Use DMA
The ECP mode has to use the DMA channel, so choose the onboard
parallel port with the ECP feature. After selecting it, the following mes-
sage will appear: “ECP Mode Use DMA.” At this time, the user can choose
between DMA channel 3 or 1.
Onboard Device
Press <Enter> to enter the sub-menu and the following screen appears:
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals. The settings are: Enabled,
Disabled.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard. The settings are: Enabled,
Disabled.
Onboard LAN Boot ROM
This setting determines whether or not to activate the boot ROM of the onboard
LAN chip. Setting options: Enabled, Disabled.
To Next Page
Loading...
