Getting Started
1-5
Quick Components Guide
Component Function
DDR1~3 Installing DDR SDRAM modules
Socket 478 Installing CPU
CPUFA Connecting to CPUFAN
SYSFA Connecting to SYSTEM FAN
ATX Power Supply Installing power supply
JPW1 Connecting to 12V power connector
IDE1 & IDE2 Connecting to IDE hard disk drive
FDD1 Connecting to floppy disk drive
JUSB1 Connecting to USB interfaces
PCI Slot 1~5 Installing expansion cards
AGP Slot Installing AGP cards
CNR Slot Installing CNR cards
JBAT1 Clearing CMOS data
JFP1/2 Connecting to case
JIR1 Connecting to IR module
JAUD1 Connecting to audio connector
JDB1 Connecting to D-Bracket™ (optional)
JSP3 Connecting to SPDIF interface (optional
S-Bracket)
JCD1 Connecting to CD-ROM audio connector
To Next Page
Loading...
