Chapter 3
3-20
Integrated Peripherals
USB Device
This setting is used to enable/disable the onboard USB controllers. Setting
options: Enabled, Disabled.
USB KB/Mouse Legacy Support
Set to Keyb+Mouse if you need to use a USB keyboard/mouse in the operating
system that does not support or have any USB driver installed, such as DOS
and SCO Unix. Set to Keyboard if you want to use a USB keyboard only.
Setting options: Disabled, Keyboard, Keyb+Mouse.
Audio/Modem Device
The settings are used to enable/disable the onboard audio/modem controller.
Disable the controller if you want to use other controller cards to connect an
audio/modem device. Setting options: Enabled, Disabled.
OnBoard LAN (Optional)
The field determines whether the onboard LAN controller is activated. The
field appears only when the mainboard supports the LAN function. Setting
options: Enabled, Disabled.
To Next Page
Loading...
