2-17
Hardware Setup
Front Panel Connector: F_PANEL1 or JFP1 (optional)
The mainboard provides one front panel connector, JFP1 or F_PANEL1, for
electrical connection to the front panel switches and LEDs. JFP1 is compliant with
Intel
®
Front Panel I/O Connectivity Design Guide.
F_PANEL1
14
1
7
8
JFP1 (optional)
9
1
2
10
HDD
LED
Reset
Switch
Power
LED
Power
Switch
PIN SIGNAL DESCRIPTION
1 HD_LED_P Hard disk LED pull-up
2 FP PWR/SLP MSG LED pull-up
3 HD_LED_N Hard disk active LED
4 FP PWR/SLP MSG LED pull-up
5 RST_SW_N Reset Switch low reference pull-down to GND
6 PWR_SW_P Power Switch high reference pull-up
7 RST_SW_P Reset Switch high reference pull-up
8 PWR_SW_N Power Switch low reference pull-down to GND
9 RSVD_DNU Reserved. Do not use.
JFP1 Pin Definition
PIN SIGNAL PIN SIGNAL
1 HDD+ 8 HDD-
2 PLED2 9 SPEAKER
3 PLED1 10 BUZ+
4 PLED3 11 BUZ-
5 PWSW+ 12 VCCSPK
6 PWSW- 13 RESET
7 NC 14 GNDR
F_PANEL1 Pin Definition
or
To Next Page
Loading...
