MSI MS-7036

3-26
MS7036 M-ATX Mainboard
PC Health Status
This section shows the status of your CPU, fan, overall system status, etc. Monitor
function is available only if there is hardware monitoring mechanism onboard.
CPU Warning Temperature
This item is used to specify a thermal limit for CPU. If CPU temperature reaches the
specified limit, the system will issue a warning and allows you to prevent the CPU
overheating problem. Settings: [Disabled], [50°C/122°F], [53°C /127°F], [56°C /133°F],
[60°C /140°F], [63°C /145°F], [66°C /151°F] and [70°C /158°F].
Current System/CPU Temperature, Current CPU/System FAN Speed, Vcore,
Vcc3 (V), +5 V, +12 V, VBAT(V), 5VSB(V)
These items display the current status of all of the monitored hardware devices/
components such as CPU voltages, temperatures and all fans’ speeds.
Shutdown Temperature
If the CPU temperature reaches the limit preset in this setting, the system will shut-
down automatically. Settings: [Disabled], [60°C/140°F], [65°C /149°F], [70°C /158°F],
[75°C /167°F].
CPU Smart Fan Temperature
Select a temperature setting here, and if the temperature of the CPU climbs up to the
selected temperature setting, the system will automatically increase the speed of the
CPU fan to cool down the overheated CPU. Settings: [Disabled], [30°C/86°F], [35°C /
95°F], [40°C /104°F], [45°C /113°F], [50°C /122°F], [55°C /131°F], [60°C /140°F], [65°C
/149°F], [70°C /158°F].
CPU Temperature Tolerance
You can select a fan tolerance value here for the specific range for the “Smart Fan
Target Temp. (
o
C)” item. If the current temperature of the fan reaches the maximum
threshold (the temperature set in the “Smart Fan Target Temp.(
o
C)” plus the tolerance
values you set here), the fan will speed up for cooling down. On the contrary, if the
current temperature reaches the minimum threshold (the set temperature minus the
tolerance value), the fan will slow down to keep the temperature stable. Setting options:
Min: [0](
o
C), Max: [15](
o
C).