5-7
Introduction to Realtek ALC 655
* Line In function is converted to
Line Out function when 4-Channel
Mode for 4-Speaker Output is
selected.
n 4-Channel Mode for 4-Speaker Output
The audio jacks on the back panel always provide 2-channel analog audio output
function, however these audio jacks can be transformed to 4- or 6- channel analog
audio jacks by selecting the corresponding multi-channel operation from No. of
Speakers.
Refer to the following diagram and caption for the function of each jack on the back
panel when 4-Channel Mode is selected.
Back Panel
3
1
2
1 MIC
2 *Line In (Rear channels)
3 Line Out (Front channels)
To Next Page
Loading...
Need help?
General
