75
BIOS Setup
fDRAM Switching Frequency [Auto]
Sets the DRAM switching frequency to stabilize system (low frequency) or to
increase the overclocking range (high frequency). If set to Auto, BIOS will configure
this setting automatically.
fDRAM VRM Over Temperature Protection [Auto]
Sets the temperature limit on DRAM VRM for over-temperature protection. The
DRAM frequency may be throttled when VRM temperature over the specified value.
If set to Auto, BIOS will configure this settings.
fCPU SA Phase Control [Auto]
Controls CPU system agent PWM phase according to the CPU loading.
[Auto] BIOS will set the CPU system agent PWM phase automatically.
[Optimized] Sets the optimum power phase profile, it could provide an optimum
power-saving capability.
[Disabled] Disables the PWM power phase switching feature.
fCPU SA Over Voltage Protection [Auto]
Sets the voltage limit on CPU SA for over-voltage protection. If set to Auto, BIOS
will configure this setting automatically. Higher voltage provides less protection
and may damage the system.
fCPU SA Under Voltage Protection [Auto]
Sets the voltage limit on CPU SA for under-voltage protection. If set to Auto, BIOS
will configure this setting automatically.
fCPU SA Over Current Protection [Auto]
Sets the current limit on CPU SA for over-current protection.
[Auto] This setting will be configured automatically by BIOS.
[Enhanced] Extends the current range of over-current protection.
fCPU SA Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU SA voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
before you increase the value. If set to Auto, BIOS will configure this setting
automatically.
fCPU SA VRM Over Temperature Protection [Auto]
Sets the temperature limit on CPU SA VRM for over-temperature protection. The
CPU frequency may be throttled when temperature over the specified value. If set
to Auto, BIOS will configure this settings.
f CPU Core/ GT Voltage Mode [Auto]*
Selects the control mode for CPU Core/ GT voltages.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage offset
To Next Page
Loading...
