23
Overview of Components
1
2 10
9
1 DCD 2 SIN
3 SOUT 4 DTR
5 Ground 6 DSR
7 RTS 8 CTS
9 RI 10 No Pin
JCOM1: Serial Port Connector
This connector allows you to connect the optional serial port with bracket.
Important
y
The JRGB1 connector supports 5050 RGB LED strips (12V/G/R/B) with the maximum
power rating of 3A (12V).
y
Please keeping the LED strip shorter than 2 meters to prevent dimming.
y
Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the RGB LED strip.
y
Please use MSI’s software to control the extended LED strip.
Video Demonstration
Watch the video to learn how to install the LED strips to the RGB LED
connector.
https://youtu.be/CqNHyADzd2Q
JRGB1: RGB LED connector
These connectors allow you to connect the 5050 RGB LED strips 12V.
1
JRGB1
Extension cable
5050 RGB LED strip 12V
1
1 +12V 2 G
3 R 4 B
To Next Page
Loading...
