To Next Page

To Previous Page



CAUTION

Do not connect the wrong type of LED strips. The JRGB connector and the JARGB_V2

connector provide different voltages, and connecting the ARGB 5V LED strip to the

JRGB connector will result in damage to the LED strip.



Important



If you connect ARGB Gen1 and ARGB Gen2 LED strips into the same connector,

it may cause issues. Please do not mix ARGB Gen1 and ARGB Gen2 LED strips

together.



It is recommended that you install LED strips with the same specification to achieve

the best effects.



Always turn off the power supply and unplug the power cord from the power outlet

before installing or removing the addressable RGB LED strip.



Please use MSI’s software to control the extended LED strip.

Questions and Answers:

Need help?

Do you have a question about the MSI Z790 EDGE WIFI and is the answer not in the manual?

MSI Z790 EDGE WIFI Specifications

General