This document is an Owner's Manual for MSpa portable hot tubs, covering models F-MO062W/82W (Mono), F-NA062W (Naval), and F-TU062W (Tuscany). It provides comprehensive information on safety, setup, operation, maintenance, and troubleshooting for these inflatable spa products.
Function Description
The MSpa hot tubs are designed to provide a relaxing spa experience with features such as heating, bubble massage, filtration, and sanitization. They are portable, inflatable units suitable for both indoor and outdoor use, offering a personal spa experience in various settings.
Important Technical Specifications
The manual details specifications for three main models:
F-MO062W (Mono) / F-NA062W (Naval):
- Shape: Round
- Seating Capacity: 6 people
- Water Capacity: 930 L (245 Gal.)
- Outside Dimensions: Ø1.73 m (68")
- Inside Dimensions: Ø1.63 m (64")
- Height: 0.65m (26")
- Weight: 37 kg (81.6 lbs)
- Temperature Increasing Rate: 1.5-2.0 °C/h
F-MO082W (Mono):
- Shape: Round
- Seating Capacity: 8 people
- Water Capacity: 1120 L (295 Gal.)
- Outside Dimensions: Ø1.92 m (76")
- Inside Dimensions: Ø1.81m (71")
- Height: 0.65m (26")
- Weight: 39.5 kg (87.1 lbs)
- Temperature Increasing Rate: 1.2-1.8 °C/h
F-TU062W (Tuscany):
- Shape: Octagon
- Seating Capacity: 6 people
- Water Capacity: 1100 L (291 Gal.)
- Outside Dimensions: Ø1.93 m (76")
- Inside Dimensions: Ø1.73 m (68")
- Height: 0.73m (29")
- Weight: 75 kg (165.3 lbs)
- Temperature Increasing Rate: 1.2-1.8 °C/h
Control System Specs (Common to all models):
- Control System: AC 220-240V~50Hz
- Rating Power: 2300W
- Heater: 2200W
- Massage Air Blower: 3 Levels (Level 1: 300W, Level 2: 500W, Level 3: 720W)
- Filter Pump: 1800L/hr
- Integrated Ozone Generator: 5.5W, 30-50mg/hr
- UVC Radiant flux: 2000uW
- Top Lid: Rhino-Tech™ reinforced PVC
- Liner Material: Drop-stitch material (MONO / NAVAL) / Plastic wood (TUSCANY)
Usage Features
The MSpa hot tubs offer a range of features designed for user convenience and safety:
- All-in-One Control Panel: An intuitive LED display allows users to control various functions.
- Heating System: Heats water from 20°C to 40°C (68°F to 104°F). Features an anti-icing system that activates automatically to heat water to 3°C (37.4°F) if the temperature drops below 1°C (33.8°F). The heater cannot operate or be reset if the water or ambient temperature is above 40°C (104°F).
- Bubble Massage: Offers three adjustable levels of bubble intensity (300W, 500W, 720W). The massage function automatically shuts off after 20 minutes as a safety precaution and can be reactivated after 10 minutes.
- Filtration System: Automatically starts when heating, Ozone, or UVC sanitizing systems are activated. It continues for 30 seconds after the heating system is turned off. A filter cartridge cleaning reminder flashes when the cartridge needs cleaning or replacement, which can be reset by pressing the FILTER button for 3 seconds. An auto-filtration feature runs for 60 minutes every 8 hours in stand-by mode.
- UVC Sanitizer: An integrated UVC emitter sanitizes the water and can be turned on at any time, even with people in the spa.
- Ozone Generator: Provides additional sanitization. The Ozonator operates for 2 hours and then shuts off automatically. It cannot be turned on when the bubble function is active, and users are advised not to soak in the spa when Ozone is on.
- Heating Timer: Allows users to pre-set the heater activation time from 1 to 99 hours in advance.
- Safety Lock: Locks/unlocks the controller by simultaneously pressing the UP and DOWN buttons for 3 seconds, disabling controls while retaining previous settings.
- Temperature Toggle: Switches the temperature display between Celsius and Fahrenheit by pressing the DOWN button for 3 seconds.
- PRCD (Portable Residual Current Device): Essential safety device located on the power cord, requiring a test before each use to ensure proper function and prevent electric shock.
- Easy Setup: Designed for quick installation (around 10 minutes) by one or more persons, with clear instructions for inflating the spa tub wall and air bladder, and connecting the control box.
- Site Preparation: Requires a flat, smooth, and supporting surface capable of bearing the spa's full weight. Adequate drainage and convenient water supply are also necessary.
Maintenance Features
The manual emphasizes regular maintenance for optimal performance and longevity:
- Filter Cartridge Maintenance: Users are instructed to inspect and gently clean the filter cartridge after each use. Replacement is recommended every 3-5 days or when soiled/discolored. The filter cartridge must always be installed when the spa is filled with water.
- Water Quality Management:
- Water Change: Recommended every 3-5 days, or when water is visibly dirty or cloudy.
- Pre-Spa Shower: Advised to reduce cosmetic products, lotions, and residues that degrade water quality.
- Spa Cover Use: Essential to cover the spa when not in use to prevent pollution and minimize heat loss during heating.
- Chemical Use: Spa chemicals are necessary to maintain proper water conditions. Misuse of chemicals voids the warranty. Users are warned against mixing chemicals, adding chemicals when the spa is occupied, and overusing chlorine.
- Water Balance: Regular testing and adjustment of pH, Free Chlorine/Bromine residual, Total Alkalinity (TA), and Total Hardness (TH) are crucial.
- pH: 7.2-7.6 (Chlorine) / 7.2-7.8 (Bromine)
- Free Chlorine: 3-5 ppm
- Bromine residual: 2-4 ppm
- Total Alkalinity (TA): 80-120 ppm
- Total Hardness (TH): 200-500 ppm
- Drainage and Cleaning: Detailed steps for draining the spa using a garden hose, drying the spa tub and control unit, and cleaning the spa wall with a sponge and mild soap solution. Steel wool, hard brushes, or abrasive cleaners are explicitly prohibited.
- Storage: Instructions for deflating, disassembling, cleaning, and thoroughly drying all components before storing the spa and accessories in a dry, temperature-controlled environment (0°C to 40°C / 32°F to 104°F). Desiccant use is recommended.
- Repair: Provides guidance on repairing punctures using the included repair patch and fixing leaking valves by tightening or re-installing them.
- Water Outlet & Inlet Cap: Instructions for using caps to prevent water leakage when removing the control box without draining the spa.
The manual also includes a troubleshooting guide with common error codes and solutions, and details the MSpa Limited Warranty, covering defects in material or workmanship for specific periods for the spa pool liner, electrical parts, and rigid wall frames.
To Next Page
General
