mspa Lite User Manual (English)

Questions and Answers:

C
Chelsea ColeAug 6, 2025
Why is my mspa Lite not heating properly?
- R
  Robert JohnsonAug 6, 2025
  Your MSpa Hot Tub might not be heating properly due to several reasons. The temperature might be set too low, so try setting a higher temperature. A dirty filter cartridge can also cause this issue, so clean or replace it. Ensure the water level is at least at the minimum line; if not, add more water. If none of these resolve the issue, it may require referring to the section regarding when the filter pump does not work.
L
Lauren MorganAug 10, 2025
How to clean the water in my MSpa Hot Tub?
- C
  chadmcdowellAug 10, 2025
  If the water in your MSpa Hot Tub isn't clean, it could be due to several factors. If the water has been used for a long time, change it. Insufficient filtering time can also cause this, so extend the filtration time. Make sure the filter cartridge is clean; if it's dirty, clean or replace it. Also, ensure you are following proper water maintenance procedures.
M
Michael MendezAug 15, 2025
What to do if my MSpa Hot Tub is leaking?
- J
  Jeanne LewisAug 15, 2025
  If your MSpa Hot Tub is leaking, first check if the spa in&outlet connection is securely tightened. If not, tighten the connection. Also, ensure the drainage valve is completely closed. If water leaks from the spa pool body, repair the leaking hole/split with the repair kit material.
M
Michael Powell DDSAug 18, 2025
How to fix an mspa Lite that loses air?
- N
  Nicholas VillarrealAug 18, 2025
  If your MSpa Hot Tub is losing air, first check if the air valve is loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly. If necessary, replace the valve. Also, inspect the spa tub for any holes or splits. If you find a leak, clean and dry the area, then use the repair patch supplied with your spa.
D
Denise PattersonAug 23, 2025
What to do if there is no display on the control panel of my mspa Lite Hot Tub?
- L
  Laurie ToddAug 23, 2025
  If there is no display on the control panel of your MSpa Hot Tub, first check the power socket. Change to a working socket or repair the existing one if it's faulty. Also, check if the PRCD is off; if so, reset it by following the PRCD Testing section.
P
Paul BurchAug 27, 2025
Why is there no bubble in my mspa Lite?
- J
  Jimmy HillAug 27, 2025
  If there is no bubble in your MSpa Hot Tub, it might be because the system auto-switches off after 10 minutes. Wait for 10 minutes and turn on the Bubble button again.
A
Ashley MitchellAug 31, 2025
Why is my mspa Lite Hot Tub in an abnormal shape?
- J
  Jacob TranAug 31, 2025
  If your MSpa Hot Tub is in an abnormal shape, it could be due to extra air pressure caused by strong sunlight. Check the air pressure and release air if necessary. During hot weather, it is advisable to check whether some air should be released to avoid any possible damage to the spa pool.