mspa Lite LR042-GR User Manual (English)

Questions and Answers:

Z
ztorresAug 6, 2025
Why is my mspa Lite LR042-GR Hot Tub not heating properly?
- C
  Catherine NelsonAug 6, 2025
  Your MSpa Hot Tub might not be heating properly due to several reasons. The temperature might be set too low, so try setting a higher temperature. A dirty filter cartridge can also cause this issue, so clean or replace it. Ensure the water level is at least at the minimum line; if not, add more water. If none of these resolve the issue, it may require referring to the section regarding when the filter pump does not work.
M
Mathew PrinceAug 10, 2025
How to clean the water in my mspa Lite LR042-GR?
- F
  fleAug 10, 2025
  If the water in your MSpa Hot Tub isn't clean, it could be due to several factors. If the water has been used for a long time, change it. Insufficient filtering time can also cause this, so extend the filtration time. Make sure the filter cartridge is clean; if it's dirty, clean or replace it. Also, ensure you are following proper water maintenance procedures.
C
Carl ThomasAug 14, 2025
What to do if my mspa Lite LR042-GR Hot Tub is leaking?
- L
  Laura CaldwellAug 14, 2025
  If your MSpa Hot Tub is leaking, first check if the spa in&outlet connection is securely tightened. If not, tighten the connection. Also, ensure the drainage valve is completely closed. If water leaks from the spa pool body, repair the leaking hole/split with the repair kit material.
D
Diana HughesAug 18, 2025
How to fix an MSpa Hot Tub that loses air?
- V
  Victoria BradshawAug 18, 2025
  If your MSpa Hot Tub is losing air, first check if the air valve is loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly. If necessary, replace the valve. Also, inspect the spa tub for any holes or splits. If you find a leak, clean and dry the area, then use the repair patch supplied with your spa.
C
christopher53Aug 23, 2025
What to do if there is no display on the control panel of my mspa Lite LR042-GR Hot Tub?
- R
  Robert CalhounAug 23, 2025
  If there is no display on the control panel of your MSpa Hot Tub, first check the power socket. Change to a working socket or repair the existing one if it's faulty. Also, check if the PRCD is off; if so, reset it by following the PRCD Testing section.
C
cruzcodyAug 27, 2025
Why is there no bubble in my mspa Lite LR042-GR Hot Tub?
- H
  Holly TerrellAug 27, 2025
  If there is no bubble in your MSpa Hot Tub, it might be because the system auto-switches off after 10 minutes. Wait for 10 minutes and turn on the Bubble button again.
B
Brian PhamSep 1, 2025
Why is my MSpa Hot Tub in an abnormal shape?
- B
  bradyronaldSep 1, 2025
  If your MSpa Hot Tub is in an abnormal shape, it could be due to extra air pressure caused by strong sunlight. Check the air pressure and release air if necessary. During hot weather, it is advisable to check whether some air should be released to avoid any possible damage to the spa pool.

mspa Lite LR042-GR Specifications

General

Model	Lite LR042-GR
Category	Hot Tub
Type	Inflatable
Capacity	4 people
Heating System	Electric
Control System	Digital
Heater	1500W
Voltage	220-240V
Filter	Cartridge
Ozone Generator	No
Cover	Included
Temperature Range	68°F to 104°F
Material	PVC
Color	Grey
Heat Increasing Rate	1.5°C/hour
Frequency	60Hz
Power Consumption	1500W
Insulation	Thermal
Warranty	1 year