To Next PageTo Next PageWhy doesn't the filter pump work on my mspa Ottoman?
If the filter pump on your MSpa Hot Tub isn't working, it could be due to a clogged filter cartridge. Try cleaning or replacing the filter cartridge. If the issue persists, it may indicate a filter system failure, and you should contact your local MSpa Service Center.
How to clean the water in my mspa Ottoman Hot Tub?
If the water in your MSpa Hot Tub isn't clean, it could be due to several factors. The water may have been used for an extended period, so try changing the water. Insufficient filtering time could also be the cause, so extend the filtration time. A dirty filter cartridge can also lead to unclean water, so clean or replace the filter cartridge. Improper water maintenance may also be the reason, so refer to the chemical manufacturer’s instructions.
How to fix no display on the control panel of my mspa Ottoman Hot Tub?
If there is no display on the control panel of your MSpa Hot Tub, first check for a power socket failure and change or repair the socket. If that's not the issue, the PRCD might be off; reset it by following the PRCD Testing section. If pressing the Reset button doesn't display anything, or if the PRCD is broken, contact the MSpa Service Center.
What to do if the filter pump on my MSpa Hot Tub doesn't work?
If the filter pump on your MSpa Hot Tub isn't working, the filter cartridge might be clogged by dirt or other objects. Clean or replace the filter cartridge. If the problem persists, there may be a filter system failure, and you should contact the MSpa Service Center.
Why doesn't the bubble air blower work on my mspa Ottoman Hot Tub?
If the bubble air blower on your MSpa Hot Tub isn't working, it might be due to the auto-off function, which activates after 10 minutes. Wait for 10 minutes and then turn on the Bubble button again. Also, check if the inflation knob is in the position; if so, turn it to the position and try turning on the bubble button again. If neither of these solutions works, the internal parts may be damaged, and you should contact the MSpa Service Center.
Why is there no bubble function in my mspa Ottoman?
If there are no bubbles in your MSpa Hot Tub, it might be because the auto-off function has activated after 10 minutes. Wait for 10 minutes and then turn the Bubble button on again. If the problem persists, it could be due to damaged internal parts or a broken one-way valve, in which case you should contact your local MSpa Service Center.
Why does my mspa Ottoman Hot Tub keep losing air?
If your MSpa Hot Tub is losing air, the air valve might be loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly; replace it if necessary. Also, check for holes or splits on the spa tub by applying soapy water to the seams; if you find a leak, clean and dry the area before applying the repair patch.
What to do if the filter pump on my MSpa Hot Tub does not work?
If the filter pump on your MSpa Hot Tub isn't working, the filter cartridge might be clogged with dirt or other objects. Try cleaning or replacing the filter cartridge. If the issue persists, it may indicate a filter system failure, and you should contact your local MSpa Service Center.
How to fix a mspa Ottoman Hot Tub that loses air?
If your MSpa is losing air, start by checking the air valve. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is tightly screwed. If necessary, replace the valve. If the issue persists, inspect the spa tub for holes or splits. To locate a leak, apply soapy water to the seams; bubbles will appear where there's a leak. Clean and dry the area before applying the provided repair patch.
How to fix an MSpa Hot Tub that loses air?
If your MSpa Hot Tub is losing air, first check if the air valve is loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly. If necessary, replace the valve. Also, inspect the spa tub for any holes or splits. If you find a leak, clean and dry the area, then use the repair patch supplied with your spa.
Critical safety warnings regarding immediate risks like drowning and electric shock.
Important safety advisories for electrical connections, supervision, and general precautions.
Guidelines for choosing a location, surface, drainage, and clearance for spa installation.
Instructions for testing the Portable Residual Current Device (PRCD) before each use.
Details on turning the heater on/off and setting the temperature.
How to activate and manage the spa's filtration system.
Lists error codes, their causes, and recommended solutions.
Addresses common issues like no display, leaks, heating, air loss, and pump failure.
Critical safety warnings regarding immediate risks like drowning and electric shock.
Important safety advisories for electrical connections, supervision, and general precautions.
Guidelines for choosing a location, surface, drainage, and clearance for spa installation.
Instructions for testing the Portable Residual Current Device (PRCD) before each use.
Details on turning the heater on/off and setting the temperature.
How to activate and manage the spa's filtration system.
Lists error codes, their causes, and recommended solutions.
Addresses common issues like no display, leaks, heating, air loss, and pump failure.
This document is an owner's manual for MSpa inflatable hot tubs, covering various models including Tekapo (C-TE043/063), Ottoman (C-OM063), Fermo (C-FE063), Bergen (C-BE043/063/083), Starry (C-ST063), and Meteor (C-ME063). It provides comprehensive instructions for setup, operation, maintenance, and troubleshooting.
The MSpa hot tub is designed for household use, offering a heated water environment with a bubble massage system. It serves as a portable spa that can be installed indoors or outdoors. The primary functions include water heating, filtration, and bubble massage. The control system allows users to adjust temperature, activate filtration, and control the bubble function. A heating timer feature enables pre-setting the heater activation. The spa is equipped with an anti-icing system to prevent water from freezing in cold temperatures.
The MSpa hot tubs operate on AC 220-240V~50Hz power. The total rating power is 2100W, with a 1500W heater, a 600W massage air blower, and an 1800L/hr filter pump. The liner material is Rhino-Tech™ reinforced PVC, and the top lid is made of PVC + Premium Rhino-Tech™.
Different models have varying capacities and dimensions:
The spa control unit includes a PRCD (portable residual current device) with a tripping current of 10mA for electrical safety. The water temperature can be set between 20°C and 40°C (68°F to 104°F).
General
