mspa Lite Orbit User Manual (English)

Questions and Answers:

V
Virginia ZimmermanAug 3, 2025
Why is my MSpa Hot Tub not heating properly?
- M
  michael29Aug 3, 2025
  Your MSpa Hot Tub might not be heating properly due to several reasons. The temperature might be set too low, so try setting a higher temperature. A dirty filter cartridge can also cause this issue, so clean or replace it. Ensure the water level is at least at the minimum line; if not, add more water. If none of these resolve the issue, it may require referring to the section regarding when the filter pump does not work.
A
Amber EdwardsAug 7, 2025
How to clean the water in my mspa Lite Orbit Hot Tub?
- B
  brownkristaAug 7, 2025
  If the water in your MSpa Hot Tub isn't clean, it could be due to several factors. If the water has been used for a long time, change it. Insufficient filtering time can also cause this, so extend the filtration time. Make sure the filter cartridge is clean; if it's dirty, clean or replace it. Also, ensure you are following proper water maintenance procedures.
M
moralesjohnAug 11, 2025
What to do if my mspa Lite Orbit is leaking?
- D
  Donald GrantAug 11, 2025
  If your MSpa Hot Tub is leaking, first check if the spa in&outlet connection is securely tightened. If not, tighten the connection. Also, ensure the drainage valve is completely closed. If water leaks from the spa pool body, repair the leaking hole/split with the repair kit material.
B
brianhuffAug 15, 2025
How to fix an mspa Lite Orbit Hot Tub that loses air?
- J
  Jerry MccallAug 15, 2025
  If your MSpa Hot Tub is losing air, first check if the air valve is loose. Inflate the spa until the yellow section of the manometer is pushed out, and ensure the valve is screwed tightly. If necessary, replace the valve. Also, inspect the spa tub for any holes or splits. If you find a leak, clean and dry the area, then use the repair patch supplied with your spa.