MTD 1033 User Manual

English Operating manual
6
 A rotating blade may cause injuries,
even when the engine has been
switched off or the throttle has
been released. Hold the unit firmly
until the blade has come to
a standstill.
 Do not run the engine at high
speed when it is not cutting.
 If you strike or ensnare a foreign
object, immediately switch off the
engine and check whether the unit
has been damaged. Have the
repair damaged before continuing
to use the unit. Do not use the unit
with a bent, cracked or blunt
blade. Throw away bent, twisted,
cracked or broken blades.
 Do not sharpen the cutting blade.
The sharpened tip of the blade
may break off during operation.
This may result in serious injuries.
Replace the blade.
After operating the unit
 Clean the cutting blades with
a household detergent to remove
any remnants. Lubricate the blade
with machine oil to prevent rust.
 Store and lock away the blade
securely to protect it from damage
and unauthorised use.
Other safety instructions
 As long as the tank still has petrol
in it, never store the unit in
a building where vapours could
come into contact with sparks
or naked flames.
 Leave the engine to cool down
before transporting or conveying
the unit. Attach the unit securely
for transportation.
 Empty the fuel tank before
transporting the unit.
 Store the unit in a dry condition,
locked away or high up to prevent
unauthorised use and damage.
Keep the unit away from children.
 Never douse or splash the unit
with water or other liquids. Keep
the handle bar dry, clean and
dust-free. Clean the unit after
each use and follow the
instructions for cleaning and
storage.
 Dispose of waste petrol/oil or any
packaging remnants in accordance
with local regulations.
 Keep this manual. Read it frequently
and use it to instruct other users.
If you lend this unit to somebody
else, also include this manual.
Operating times
Observe the national/municipal
regulations concerning times of use
(if required, ask your local authority).
Symbols on the appliance
This operating manual describes
safety and international symbols and
pictograms which may be displayed
on this unit. Read this user handbook
in order to familiarise yourself with all
safety, installation, operating and
repair instructions.
Attention!
Before starting up
the unit, read the
operating instructions!
Wear eye, hearing and
head protection.
While operating this
unit, wear heavy duty
boots and protective
gloves.
Keep third parties
away from the danger
area!
Ejected objects and
rotating parts may
cause serious injuries!
Risk of injury from
rotating parts!
Keep hands and feet
away from rotating
parts.
Beware of hot
surfaces!
Petrol/Oil!
Always use clean and
fresh lead-free petrol
for mixing petrol. Use
only authorised oil
according to the
operating manual for
mixing petrol.
Do not fill up with fuel
of specification E85!
Maximum rpm
Do not let the unit run
more quickly than the
maximum rpm.
Ignition switch
Cold start position
Ignition switch
On /run/start
Ignition switch
Off/stop
Choke settings
1 – Full choke start
position.
2 – Half choke
intermediate position.
3 – Operating position.
Ensure that these symbols on the
unit are always in a legible state.
Symbols used in this manual
The following symbols are used in
this manual:
a~åÖÉê
qÜÉó=êÉÑÉê=íç=Ç~åÖÉêë=ïÜáÅÜ=~êÉ=
ÅçååÉÅíÉÇ=ïáíÜ=íÜÉ=ÇÉëÅêáÄÉÇ=~Åíáîáíó =
~åÇ=ïÜáÅÜ=ã~ó=êÉëìäí=áå=áåàìêóK
`~ìíáçå
qÜÉó=êÉÑÉê=íç=Ç~åÖÉêë=ïÜáÅÜ=~êÉ=
ÅçååÉÅíÉÇ=ïáíÜ=íÜÉ= ÇÉëÅêáÄÉÇ=~Åíáîáíó =
~åÇ=ïÜáÅÜ=ã~ó=êÉëìäí=áå=Ç~ã~ÖÉ=íç=
éêçéÉêíóK
Note
Indicates important information
and application tips.
!

MTD 1033 Specifications

General

Brand	MTD
Model	1033
Category	Trimmer
Language	English