EasyManua.ls Logo

MTD 2M1 - Oil Recommendations; Spark Plug Inspection and Service

MTD 2M1
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Oil Recommendations
When adding oil to the engine, refer to the viscosity chart

oz.). Do not over-fill. Use a 4-stroke, or an equivalent high
detergent, premium quality motor oil certified to meet or
exceed U.S. automobile manufacturers requirements for service
classification SG, SF. Motor oils classified SG, SF will show this
designation on the container.

2-stroke engine oil. It could shorten the engine’s
service life.
Spark Plug


the spark plug removed.
If the engine has been running, the
muffler will be very hot. Be careful not to touch the
muffler.
To ensure proper engine operation, the spark plug must be
properly gapped and free of deposits.
Remove the spark plug boot and use a spark plug wrench to 1.
remove the plug, Fig. 7-3.
Visually inspect the spark plug. Discard the spark plug if 2.
there is any apparent wear, or if the insulator is cracked or
chipped. Clean the spark plug with a wire brush if it is to be
reused.


5W-30
0W-30


-40°   40°
-30°  -10°





16 se c t i O n 7— en g i n e Ma i n t e n a n c e

Related product manuals