EasyManua.ls Logo

MTD 2M1 - Controls and Features; Choke Lever; Primer; Ignition Key

MTD 2M1
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Choke Lever
Activating the choke control closes the choke plate on
carburetor and aids in starting engine.
Primer

carburetor to aid in cold-weather starting.
Ignition Key
The ignition key is a safety device. It must be fully
inserted in order for the engine to start. Remove the
ignition key when the snow thrower is not in use.
NOTE: Do not turn the ignition key in an attempt to
start the engine. Doing so may cause it to break.
Recoil Starter
The starter handle is used to manually start the engine.
Gasoline Cap
Remove the gas cap to add fuel.
Auger
When engaged, the augers rotation draws snow into the auger
housing and throws it out the discharge chute. Rubber paddles
on the augers also aid in propelling the snow thrower as they
come in contact with the pavement.
Auger Control
Located on the upper handle, the auger control handle is used
to engage and disengage drive to the auger. Squeeze the control
handle against the upper handle to engage the auger; release it
to disengage.















Starter





Controls and Features
4
10

Related product manuals