Maintenance
Lubrication
Lubricate the pivot points on the control handle and the
extension spring at the end of the control cable with a light
oil once every season and before the snow thrower is put into
storage at the end of the season.
0ff-SeasonStorage
If the snow thrower will not be used for 30 days or longer, follow
the instructions below.
1.
2.
Store the equipment in a clean, dry area.
If storing the snow thrower in an unventilated area,
rustproof the machine using a light oil or silicone to coat
the snow thrower.
3. Clean the exterior of the engine and the snow thrower.
4. Lubricate pivot points on control handle and extension
spring at end of control cable with a light oil.
SECTION 6 -- MAINTENANCE & ADJUSTMENTS 15
To Next Page
Loading...
