EasyManua.ls Logo

MTD 400 - Maintenance & Adjustments

MTD 400
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

the machine, shut off the engine, wait for all moving
parts to come to a complete stop, disconnect the
spark plug wire and move the wire away from the
spark plug. Failure to follow these instructions can
result in serious personal injury or property damage.
Maintenance
Engine
Refer to the Engine Maintenance section for all engine
maintenance.
Tire Pressure
Check the air pressure in both tires. The air pressure should

prevent machine from pulling to one side.
Hardware
Check for loose or missing hardware after every 10 operating
hours and tighten or replace — as needed — before reusing the
tiller

secure the transmission cover and the Depth Regulator Lever to
the transmission.
Air Filter
The air cleaner filters dirt and dust out of the air before it enters

air filter can cause poor performance and damage to the engine.
Never operate the engine without the air cleaner installed.
Inspect and service the air cleaner more often if operating in
very dusty or dirty conditions. Refer to the Engine Maintenance
section for air cleaner service intervals and instructions.
Maintenance Schedule

After first

Before







See


Check Motor Oil Level
P P
Clean Engine
P P
Check Drive Belt Tension
P P
Check Nuts and Bolts
P P
Change Motor Oil
P P
Lubricate Tiller
P
Service Engine Air Cleaner System
P
Check Gear Oil Level in Transmission
P
Check Tines for Wear
P
Check Air Pressure in Tires
P
Service Spark Plug
P
Maintenance & Adjustments
6
17

Related product manuals