IGNITION SYSTEM
57
Spark plug removal
1. Disconnect and ground the spark plug wire.
2. Remove the spark plug using a 13/16” or 21mm
wrench. A flexible coupling or “wobbly” exten
-
sion may help. See Figure 7.17.
3. Gap a new spark plug to .024”-.032” (.60-.80
mm).
4. Install the new spark plug and tighten to a torque
of 15 - 18 ft - lbs (20-25 Nm).
Figure 7.17
High tension lead
Muffle
Valve cover
13/16” spark plug
socket
www.mymowerparts.com
For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983
To Next Page
Loading...
