EasyManua.ls Logo

MTD Cub Cadet 2000 Series - Page 24

MTD Cub Cadet 2000 Series
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(QJOLVK 2ZQHUV*XLGHÒ&XE&DGHW6HULH

After every 30 hours or
three times per season
Lubricate both bearings
of the steering housing
(4) (see fold-out page)
Use 251 EP grease or similar multi-
purpose lithium grease, no. 2.
Operator
Lubricate both bearings
(5) of the front wheels
(see fold-out page)
Use 251 EP grease or similar multi-
purpose lithium grease, no. 2.
Operator
After every 50 hours or
twice per season
Lubricate the supporting
wheels (8) of the cutting
mechanism (see fold-
out page)
Use 251 EP grease or similar multi-
purpose lithium grease, no. 2.
Operator
After every 100 hours or
once annually
Change the gear-oil filter
(only for hydrostatic
drive)
Change the gear-oil filter. Service
Check the paper insert
in the air filter
Replace when necessary
(see handbook for engine).
Operator/Service
Change the engine oil
and oil filter
Refer to the handbook for the engine
or consult a specialist workshop.
Operator/Service
When Activity Execution To be done by

Table of Contents

Related product manuals