To Next PageTo Next Page
Need help?Do you have a question about the MTD OEM-190-823 and is the answer not in the manual?
General| Type | Two-Stage |
|---|---|
| Auger Material | Steel |
| Skid Shoes | Adjustable |
| Throw Distance | 40 ft |
| Warranty | 2 years limited |
Instructions for finding the model and serial number on the equipment's plate.
Guidance on contacting customer support with necessary information.
Essential training and preparation steps before operating the snow thrower attachment.
Critical safety rules for operating the snow thrower attachment to prevent injury.
Regular checks of safety devices, bolts, and components for safe operation.
Guidelines for storing the snow thrower attachment and fuel safely.
Specifies the compatibility of the Model 823 snow thrower with specific tractors.
Lists and illustrates all parts included in the snow thrower attachment crate.
Step-by-step guide for mounting the idler assembly on specific tractor decks.
Attaching the undercarriage, idler pulley, and pin to PTO engagement plate.
Connecting the lift handle and chute directional control assemblies.
Securing the auger housing and support tubes to the tractor frame.
Procedure for activating the snow thrower's auger and impeller via the tractor's PTO.
How to use the lift handle to raise and lower the snow thrower attachment.
Explains operation of chute tilt and crank for snow discharge direction.
Essential operating procedures for efficient and safe snow removal.
How to adjust the lift index rod for proper latching and slack in the lift cable.
Adjusting the support bracket for proper engagement of the chute crank spiral.
Adjusting skid shoes for ground clearance based on surface conditions.
Identifying and lubricating key points like chute controls and auger shaft.
Visual representation and numbering of all parts for the Model 823 snow thrower.
Details of MTD LLC's limited warranty for the snow thrower attachment.
