Sine Wave 2-8 kHz Series A Filter
IMPORTANT USER INFORMATION
NOTICE
The MTE Corporation Sine Wave Filter is designed to convert output voltage wave
forms produced by a wide variety of PWM inverters into a low distortion sine wave for
drive and power conversion applications. The suitability of this filter for a specific
application must therefore be determined by the customer. In no event will MTE
Corporation assume responsibility or liability for any direct or consequential damages
resulting from the use or application of this filter. Nor will MTE Corporation assume
patent liability with respect to the use of information, circuits or equipment described
in this instruction manual.
To Next Page
Loading...
