87
MAINTENANCE
1. Check and clean mower regularly once a week.
2. When you first start using the mower, the blade plate, protections plate and blades should be checked
once a month.
3. It is important that the blades and blade plate rotate easily.
4. Blade edges should not be damaged. Blade life depends on the type of grass, soil, lawn etc.
5. Working with dull blades gives a poor mowing result, which needs more power to mow, meaning the
mower covers a smaller area at a time.
6. Charge the battery fully at the end of the season before winter storage. If storage time is longer than one
year you will need to recharge the mower before use.
WINTER STORAGE
1. Mower must be carefully cleaned before winter storage. Charge the battery fully before storage
2. Store the mower in the station and place in a dry area to protect from frost, preferably stored in the
original packaging.
3. Boundary wire can be left in your lawn. As the charging station is removed you should protect boundary
wire end from moisture with electrical tape.
AFTER WINTER STORAGE
1. Check whether the mower, boundary wire and charging rods need to be cleaned before use. If the
charging strips appear to be rusty, clean them by using an emery cloth or suitable abrasive cloth. Check
whether the mower time and date are setting correctly.
2. Check whether the blades need to be changed.
3. Check whether the blades and blade plate turn easily.
PRODUCT CARE
Wear protective gloves when handling, cleaning or replacing the blade.
To reduce the risk of injury ensure that cutting blades are removed when the mower
is not in use, being transported, handled or stored.
Do not clean or wash the machine with a stream of water
To Next Page
Loading...