MTF DM2 2500i - Laying the Boundary Wire

73
LAYING THE BOUNDARY WIRE
Keep the wire straight for at least the first 2 m. This
is to allow the mower to return to the charging
stand with ease.
Place the pegs at intervals of about 1m on straight
and even ground, 30cm to 50cm on bends and
corners. Uneven ground and obstacles will require
more pegs.
The perimeter wire must be kept tight. If it is loose
it may well end up being cut by the mower as it
passes over it.
The perimeter wire must be kept tight. If it is loose it
may well end up being cut by the mower as it passes
over it.