M.T.H. HO ES44AC PS3E+ Diesel Engine
28
User-Settable F-Function List
This feature allows you to take the 28 F-Functions that currently reside in each
MTH Protosound 3.0E+ equipped HO Engine and change the location of that
function. For example: F18 is currently Extended Shut Down and you'd like that
placed down to F28 which is Feature Reset. The below instructions explain how
you can do this.
Note – When you set a particular F-Function to a numeric location you are
overwriting that existing number's function. Further, you are leaving the location
where the previous function was moved from empty, which means that F-Function
no longer has any function associated with it.
In order to move the F-Functions around you will need to refer to the below table.
Note – The Function Identification number IS NOT the F Function number you'd
use on your DCC handheld. It is used internally in the engine:
SOUNDS
Bell 1
Brake Sounds 2
Cab Chatter 3
Clickety Clack 4
Coupler Close 5
Coupler Slack 6
Drift Chuff 7
Engine Sounds 8
Forward Signal 9
Grade Crossing Signal 10
Horn 11
Idle Sequence 1 12
Idle Sequence 2 13
Idle Sequence 3 14
Idle Sequence 4 15
Labor Chuff 16
Master Volume 17
Short Horn 18
One Shot Doppler 19
Reverse Signal 20
SCRIPTS
Extended Shut Down 21
Extended Start Up 22
PFA 23
Start Up/Shut Down 24
Train Wreck 25
Trolley Manual Mode 26
Trolley Learn Mode 27
Trolley Auto Mode 28
FUNCTION
IDENTIFICATION
Function Identification Chart
OTHER FUNCTION
FUNCTIONS IDENTIFICATION
Feature Reset 29
Front Coupler 30
Front Pantograph
Up/Down 31
Pantograph
Auto/Manual 32
Rear Coupler 33
Rear Pantograph
Up/Down 34
Rev Down 35
Rev Up 36
Smoke On/Off 37
Smoke Volume 38
Disable Momentum 40
(Motorola)
Half-Speed (Motorola) 41
Switch—Half-Speed/ 42
Momentum Disable
(Motorola)
Electric Boiler Start-Up 45
Electric Pressure Release 46
LIGHTS
Lights 39
Marker (Train/No Train) 43
Beacon
(Alt Lighting/Country) 44
To Next Page
Loading...