Lubrication
Using light machine or household oil, apply a very small amount to all axles
points as shown.
Your gearbox is properly greased at the factory and probably never needs service
however, if you run excessive hours pulling heavy loads, it's a good idea to
remove the gearbox cover and re-grease using M.T.H. gear grease or equivalent.
To remove the gearbox cover, snap it off from one of the ends.
M.T.H. HO ES44AC PS3E+ Diesel Engine
8
SET-UP
Lubricate Axles (L)
Lubricate Axles (L)
Gearbox Cover
Couplers
This engine comes equipped with a NEM 362 coupler pocket and NEM 360
couplers. If you do not wish to use the NEM 360 coupler you can use any
coupler that fits the standard NEM 362 coupler pocket.
To Next Page
Loading...