Digital Control
In standard analog AC or analog DC mode, your model still operates under digital
control. The PS 3E+ advance speed control system converts track voltage into
digital speed commands. Your model will run smoothly and consistently at any
speed regardless of load, hills, or curves. If you are a DCC/Motorola user,
you'll quickly learn to appreciate the precision of our speed control and linear
speed curve. DCS users will enjoy the added benefits of controlling speeds in
increments of 1 scale mile per hour displayed on DCS controllers or easily
changing acceleration and deceleration rates independently without any discussion
of bits or bytes. To be clear, DCS is NOT DCC.
Lights
As you read on, you'll notice there are no instructions for replacing light bulbs
in your diesel. That's because there aren't any. We use specially designed and
controlled LEDs to create realistic lighting effects that occur automatically.
Again, NO PROGRAMMING!! Just come to a stop and watch as the headlight
dims automatically in accordance with rule 17. Of course, as you pull away,
the headlight returns to it's fully bright, yet warm, glow. We even included a light
in the cab so the engineers can see to do their jobs!
More…
In analog DC operation, just flip the track polarity or direction switch at any speed
and watch your Engine gradually come to stop, turn on the appropriate directional
lighting, and smoothly accelerate back up to speed. No other HO locomotive has
features like these. There are so many more things to learn and enjoy about M.T.H.
HO Engines, we could write a book. But, that's no fun. So, if you haven't already
done so, flip to the Quick Start Guide and let's run your new engine!!
M.T.H. HO ES44AC PS3E+ Diesel Engine
6
To Next Page
Loading...