MTS Systems Bionix User Manual

Installation
60 MTS Landmark™ Tabletop Load Units - Product Information
Caution:
The crosshead can slowly drift down the columns if the locks are turned off and when hydraulic
pressure is turned off.
The crosshead can damage any test fixtures, grips, and specimen in its path.
Unlock the crosshead only to reposition it. Always lock the crosshead after you have
repositioned it and never leave the crosshead unlocked.
1. Turn on hydraulic pressure.
2. Fully loosen the manual crosshead locking bolts in the order shown in the following figure.

MTS Systems Bionix Specifications

General

Brand	MTS Systems
Model	Bionix
Category	Test Equipment
Language	English