MTS Systems Bionix User Manual

Maintenance
MTS Landmark™ Tabletop Load Units - Product Information 87
Calendar Time using 8 hour
Running Time Rate Per Day
Daily Weekly Biweekly Annually
Running Time-Hours 8 40 80 500 1000 1,500 2,000
Ensure that the piston rod wear is at
an acceptable level.
MTS MTS MTS MTS
Lubricate the axial/torsional spline.
(Bionix frame at 75-100 hrs)
MTS MTS MTS MTS
Verify the performance at low velocity
in the up direction.
MTS MTS MTS MTS
Verify the performance at low velocity
in the down direction.
MTS MTS MTS MTS
Hydraulic Service Manifold
Complete a cursory check of the
hydraulic service manifold.
MTS MTS MTS MTS
Monitor the filter indicators. MTS MTS MTS MTS
Ensure that the manifold hose
connections are tight.
MTS MTS MTS MTS
Ensure that the accumulator
connections are dry.
MTS MTS MTS MTS
Ensure that the accumulator
connections are tight.
MTS MTS MTS MTS
Ensure that all of the accumulator
caps and guards are present.
MTS MTS MTS MTS
Oil the accumulator on the gas side of
the piston.
MTS MTS MTS MTS
Check and adjust the pressure in the
accumulator.
MTS MTS MTS MTS
Change the filters. MTS
Perform the low pressure adjustment
(Model 294).
MTS
Hoses/Cables
Complete a cursory check of the
hoses, cables, and connectors.
MTS MTS MTS MTS
Ensure that the hoses show no signs
of abrasions, blisters, or vulcanizing.
MTS MTS MTS MTS

MTS Systems Bionix Specifications

General

Brand	MTS Systems
Model	Bionix
Category	Test Equipment
Language	English