What to do if illuminated pushbutton “Replace filter element” is lit on MTU 12V 2000 C66 Engine?
If the illuminated pushbutton “Replace filter element” is lit on your MTU Engine, it could be that the maximum permissible differential pressure of 1.5 bar was exceeded, requiring you to replace the coalescer filter element. You can also press the illuminated pushbutton “Replace filter element” to acknowledge.
What to do if illuminated pushbutton “Water alarm” is lit on MTU Engine?
To address an illuminated “Water alarm” pushbutton on the MTU Engine, press the illuminated pushbutton “Water alarm” to acknowledge. Additionally, you can manually drain water by pressing the illuminated pushbutton “Water drain” to open the drain valve, complementing the automatic water drain function.
General| Engine Type | Diesel |
|---|---|
| Configuration | V12 |
| Bore | 130 mm |
| Stroke | 150 mm |
| Fuel Type | Diesel |
| Weight | 2800 kg |
| Displacement | 23.93 liters |
| Aspiration | Turbocharged |
General safety instructions, correct use, modifications, spare parts, and rework of components.
Requirements for trained personnel and organizational measures for safe operation and maintenance.
Guidelines for transport, maintenance, repair, and handling of materials.
Diagram and explanation of engine components, sides, and cylinder designations.
Technical data including dimensions, firing order, power ratings, and operating conditions.
Steps for putting the engine into operation after service periods and checks prior to start-up.
Procedures for starting, stopping, emergency stopping, and operational checks of the engine.
Procedures for operating the fuel treatment system, including switching on and shutdown.
Procedures and safety precautions for cleaning the engine or plant.
Table referencing maintenance tasks and their corresponding page numbers in the Maintenance Schedule.
Troubleshooting guide for the fuel treatment system, covering alarms and fault indicators.
General troubleshooting for common engine issues like starting, firing, speed, and exhaust.
Covers engine barring, crankcase breather, valve drive, and cylinder head cover maintenance.
Tasks for injectors, fuel lines, filters, prefilters, and fuel system operations.
Maintenance for air filters, oil systems, and coolant circuits.
Tasks for belt drives, fuel supply system checks, engine governor, and wiring.
Alphabetical list of abbreviations used in the manual with their meanings and explanations.
Information on how to contact MTU for local support, 24h hotline, and spare parts service.
List and illustrations of special tools required for various maintenance tasks.
Alphabetical index of topics covered in the manual for quick reference.
To Next Page