EasyManuals Logo

MTU 12V4000C Series User Manual

MTU 12V4000C Series
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
8.9 Fuel Filter
8.9.1 Fuel filter – Replacement
Preconditions
Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Filter wrench
F30379104 1
Engine oil
Easy-change filter
(→ Spare Parts Catalog)
WARNING
Fuels are combustible and explosive.
Risk of fire and explosion!
Avoid open flames, electrical sparks and ignition sources.
Do not smoke.
Wear protective clothing, protective gloves, and safety glasses / facial protection.
WARNING
Liquid or gaseous media, e.g. fuel, are poisonous.
Escaping vapors of highly volatile media, e.g. fuel or ether.
Risk of fatal injury through swallowing; risk of poisoning through inhalation; irritation to eyes
and skin!
Seek medical attention immediately; do not induce vomiting.
Do not inhale vapors or mist.
Wear protective clothing, protective gloves, and safety glasses.
If contact is made with skin, wash off with water and soap.
Fuel filter – Replacement
1. Use filter wrench to remove easy-change fil-
ter.
2. Clean sealing surface on filter head.
3. Coat seal on easy-change filter slightly with
engine oil (arrow).
4. Screw on the easy-change filter by hand until
the seal makes contact and tighten finger-
tight.
5. Replace further easy-change filters in the
same way.
6. Vent fuel system (→ Page 102).
MS150049/04E 2017-04 | Fuel Filter | 103
TIM-ID: 0000075930 - 001

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MTU 12V4000C Series and is the answer not in the manual?

MTU 12V4000C Series Specifications

General IconGeneral
BrandMTU
Model12V4000C Series
CategoryEngine
LanguageEnglish

Related product manuals