4.5 Product data 16V4000C31
Legend
DL Ref. value continuous power (CP): Continuous power under standard conditions
BL Ref. value fuel stop power (FSP): Maximum engine power; not available for continuous operation in
some applications (control reserve)
A Design value: Value required to design an external system (plant)
R Reference value: Typical average value for information, only partially suitable for design purposes
L Limit: Value which must not be violated (lower limit value, min. value / upper limit value, max. value),
not suitable for design purposes
N Non-defined value: Value yet to be or not defined
- Not applicable: Module does not apply to this product type
X Applicable: Module applies to this product type
> Actual value must be greater than the specified value.
< Actual value must be less than the specified value.
* Value not adequately verified (tolerance +/- 10%)
** Value not adequately verified (tolerance +/- 5%)
ID Product type Application Engine speed List perform-
ance
1 16V4000C31 Industrial / vehicle
main drive
5B continuous opera-
tion, variable
1900 rpm 2125 kW
2850 bhp
Optimized fuel con-
sumption,
Reference conditions
ID 1
Intake air temperature °C 25
Barometric pressure mbar 1000
Site altitude above sea level m 100
Performance data
ID 1
Rated engine speed A rpm 1900
Continuous power (without fan) (fuel stop power) A kW 2125
General conditions (for max. power)
ID 1
Intake depression (new filter) A mbar 25
Intake depression, max. L mbar 50
Exhaust overpressure A mbar 37
Exhaust overpressure, max. L mbar 50
Model related data (basic design)
ID 1
Cylinder arrangement: V angle Degrees 90
Bore mm 165
Stroke mm 190
MS150049/04E 2017-04 | Technical Data | 41
TIM-ID: 0000070353 - 001
To Next Page
Loading...
Need help?
General