MTZ 952 - Lubrication Table

Maintenance
MTZ series 900
216
LUBRICATION TABLE
Units and points of lubri-
cation
Standard name, brand and description of the lubricating materials and liquids
Amount of
lubricating
points
Lubricant at operation temperature
Refill at opera-
tion, l
Greasing at
storing (up to
6 months)
From -40C to
+5C
From +5C to +50C
Crankcase
Motor oil
Standard
М-8ДМ
М-10ДМ
12.0
12.0
1
Backup
М-8Г
2К
, М-8Г
2
M-10Г
К2
, М-10Г
2
Air cleaner tray
Pre-settled and filtered waste motor oil
1.7
3.0 (Д-245.5)
1.7
3.0 (Д-245.5)
1
Power train casing
Standard
“wet”-type brake casings
(if installed)
Transmission oil
Тап-15в*;
ТСп-15К; ТСп-
10
ТСп-15К
40
1.5 (left)
1.0 (right)
40
1.5 (left)
1.0 (right)
1
1
1
Backup
Transmission oil
ТАД-17и
Transmission oil
ТАД-17и
FDA final drive reducing
gear casings
----
----
1.8 (2.0)**
1.8 (2.0)**
2
FDA casing
Ditto
Ditto
1.6 (3.7)**
1.6 (3.0)**
1
Upper bevel pair casings
of FDA reducing gears
----
----
0.25
0.25
2
FDA drive intermediate
support
----
-----
0.15
0.15
1
Driving pulley
------
----
0.50
0.50
1
_______________________________
* At the temperature of –15°C to –20°C, dilute 30% of the refilling volume with spindle oil АУ State
Standard ГОСТ 1642-75 or machinery oil И-12А State Standard ГОСТ 20799-75. At the tempera-
ture of up to –55°C, dilute up to 15% of the refilling volume with winter diesel fuel.
** The refill capacities are given in parentheses for the FDA with planetary reducing gears (MTZ-
920.2/920.3/952.2/952.3)