Need help?Do you have a question about the Multi-Tech MTA128ST-USB and is the answer not in the manual?
General| Brand | Multi-Tech |
|---|---|
| Model | MTA128ST-USB |
| Category | Adapter |
| Language | English |
Overview of the manual's purpose and content.
Details the features and capabilities of the MTA128ST-USB.
Explains the USB connection standard and its benefits for peripherals.
Describes the structure and division of the user guide chapters.
Lists the primary functionalities and advantages of the terminal adapter.
Provides detailed technical data, interface details, and operational parameters.
Introduces hardware setup and guides the user through unpacking the device.
Outlines critical safety precautions for installing ISDN equipment.
Details physical assembly and connection steps to the system.
Guides on connecting the device to PC, power source, and ISDN network.
Explains the meaning and function of each LED on the front panel.
Lists external resources for additional information on terminal adapters.
Overview of software installation for Windows 2000, 98, and 95.
Step-by-step guide for installing the MTA128ST-USB driver on Windows 2000.
Procedure to modify the device's descriptive name in Windows 2000.
Step-by-step guide for installing the MTA128ST-USB driver on Windows 95/98.
Procedure to modify the device's descriptive name in Windows 95/98.
Instructions for uninstalling old modem drivers to avoid conflicts.
Guide on using the dedicated utility for device setup and customization.
Instructions for configuring ISDN connections using Windows 2000's DUN.
Instructions for configuring ISDN connections using Windows 98/95's DUN.
Explains how to use AT commands for device setup and customization.
Overview of AT commands, S-registers, and result codes for device control.
Describes how to input AT commands and the device's operational modes.
Lists and explains AT commands categorized by their operational purpose.
Details AT commands specifically for initiating and managing data calls.
Explains AT commands for setting network switch types and related parameters.
Describes AT commands that control interaction via the USB port.
Explains S-registers as memory locations for storing device settings and parameters.
Details the response codes sent by the TA to indicate command execution status.
Overview of common issues and problem-solving approaches.
Addresses problems with power, LEDs, command response, and initial connection.
Covers issues related to dialing, call setup, connection types, and disconnections.
Discusses problems affecting data transfer speed and data loss.
Addresses troubleshooting specific device interactions and protocol errors.
Introduces warranty terms and support information for the MTA128ST-USB.
Outlines the terms, conditions, and exclusions of the product's warranty.
Provides specific instructions for product service and return for North America and international.
Information on repair costs for out-of-warranty units and online registration.
Presents the legal terms and conditions for using the bundled software.
Details how to contact technical support and arrange for product service.
Information on how to order replacement parts and accessories for the device.
Specifies compliance with US Federal Communications Commission regulations.
Outlines adherence to Canadian regulations for digital apparatus.
Covers compliance with European Community Directives on electromagnetic compatibility and safety.
Lists predefined configuration profiles for specific port operations.
Provides a practical demonstration of loading and saving configuration profiles.
To Next Page