Multiplex PARTENAVIA P.68 - Control Surface Testing; Aileron Control Surfaces; Elevator Control Surfaces; Rudder Control Surfaces

21
Control Surface Testing
Before each ight turn on the transmitter BEFORE connecting a fully
charged battery and perform a full pre-ight functional check-pay
attention to all control surfaces for correct direction of operation.
Aileron control lever moving leftward
Elevator control lever moving upward
Rudder control lever moving leftward
Aileron control lever moving rightward
Elevator control lever moving downward
Rudder control lever moving rightward
Flaps deployed
Note: SAFETY FIRST!! Please remove the propeller (where
applicable) before carrying out any pre-flight maintenance to
the power system to prevent potential injury from unintended
propeller operation.
Multiplex strongly recommends you also perform a full range
test prior to each flight!
ALWAYS CHECK CONTROL SURFACE DIRECTION FROM BEHIND THE MODEL LOOKING FORWARD TO ENSURE CORRECT OPERATION
EN