MULTISPAN CC-11 User Manual

OPERATING MANUAL
CURRENT CONTROLLER
www.multispanindia.comPage - 1
Technical Specification:
96 X 96 mm
1) Micro Controller Based, Single Display.
2) Dimension: 96 X 96 X 70
3) Panel Cutout: 92 X 92 mm.
4
Aux.
) Input : 0-5 Amp AC.
5) Output : 1 Relay with 1 C/O,230V AC, 5A.
6) Range : 5 To 1600 CT SELECTABLE AC.
7) Supply: 90 to 270V AC/DC, 50/60 Hz (SMPS).
1) Press SET key for 2 sec. to confirm the change and to go to next step.
2) Press ENT key to SAVE & EXIT at any step in PARAMETER MENU.
3) Auto-exit is for 10 sec. Menu exit without saving.
4) In PARAMETER MENU,
HYSTERESIS Range : 0.1 to 99.0
CORRECTION FACTOR Range : 20 % Value of CT Primary.
Configuration:
CC-11
AMP
 .
Terminal Connection Diagram
Input:
Range:
Version:
CT Selectable
0-5 AC AMP
1012
0 To 5
AC AMP
I/P
5 To 1600
1
L N
NC
C NO
2 3
4
5 6 7 8 9 10
RELAY-1
90-270V AC/DC
50/60 Hz

MULTISPAN CC-11 Specifications

General

Brand	MULTISPAN
Model	CC-11
Category	Controller
Language	English

Summary

Technical Specifications

Device Specifications

Details on display, dimensions, input, output, range, and auxiliary supply.

Configuration

Parameter Menu Operations

Instructions for confirming changes, saving, exiting, and parameter ranges.

Terminal Connection Diagram

Wiring Guide

Illustrates input, range, and relay connections for the current controller.

User Configuration

Parameter Setup Flow

Step-by-step guide for setting parameters like Set Value, Hysteresis, Delay Time, and CT Primary.

Correction Factor

Setting Correction Factor

Procedure for adjusting the correction factor value using the device interface.

Working Principle

Operational Modes and Relay Logic

Explains how the controller operates based on set values, alarms, and delay times.